The Original Color Chips Company - Waterborne Epoxy Basecoat M.S.D.S.

26200 Groesbeck Hwy.
Warren MI,48089
( 586 ) 771 - 6500

Material Safety Data Sheet
Waterborne Epoxy Basecoat

Part A

Section 1 - PRODUCT DESCRIPTION

Manufactured by: Duochem, Inc.

Address: 1250 Graham Bell - Boucherville, QC. J4B 6H5

Phone: (450) 655-6421 Fax: (450) 641-4701

Emergency: (nights & weekends) (450) 464-8291

Use: Epoxy Coating

WHIMS classification: D2A, D2B

Section 2 - HAZARDOUS INGREDIENTS

Hazardous Ingredients	Concentrate % W.W	Cas No.	LD50 rat-oral	LD50 rabbit skin	LC50 rat-4 hours	Threshold Limit ACGIH
Reaction product of epichlorohydrin & bisphenol A	7.13	25085-99-8 25068-38-6	> 5000 mg/kg	6 gm/kg	N.D.	N.D.
Technical alkyl (C12-C14) glycidyl ether	1-5	68609-97-2	2000 mg/kg	4.5 gm/kg	> 1.5 gm/m�	N.D.
2-Ethoxyethanol	1-5	110-80-5	2125 mg/kg	3.3 gm/kg	2645 ppm	5 ppm (skin)
Ethylene glycol	0.1-1	107-21-1	4700 mg/kg	9.53 gm/kg	10.9 gm/m�	39 ppm (ceiling)

Section 3 - TOXICOLOGICAL & HEALTH HAZARD DATA

LD50 (rat-oral): > 13 mg/kg (calculated)

LD50 (rabbit skin): > 20 gm/kg (calculated)

LC50 (rat-4 hrs): N.D.

Acute Effect:	None known.
Eyes:	May cause irritation, tears, and redness.
Skin:	May cause irritation.
Inhalation:	May cause irritation or respiratory tract (mist or vapors or warm product).
Ingestion:	Nausea, vomiting and diarrhea. May cause breathing difficulties. Ingestion of large quantity may cause kidney damages.
Chronic Effect:	Prolonged or repeated contact may cause skin sensitization and absorption through skin in harmful amounts. Teratogen, toxic for reproduction.
Remark / Warning:	Contain 2-ethoxyethanol for which laboratory animal exposure study indicates the possibility of testicle and blood changes, birth defects and sterility.

Section 4 - FIRST AID

Eyes:	Wash with plenty of water for at least 15 minutes while maintaining eyelids open. Consult a physician if irritations persist.
Skin:	Wash with mild soap and water. Wash clothing before re-use, discard clothing that cannot be decontaminated. Consult a physician if irritations persists.
Inhalation:	Remove victim to fresh air. Assist breathing if necessary. Consult a physician if still feeling discomfort.
Ingestion:	Ask for medical help. If victim is conscious, give water or milk. DO NOT INDUCE VOMITING. Keep victim calm and warm.

Section 5 - PHYSICAL DATA

Physical State:	Liquid.
Odor:	Epoxide
Appearance:	Various colors
Odor Threshold:	N.D.
Vapor Tension:	4 mm Hg @ 20� C (2-ethoxyethanol).
Ebullition Point:	100� C (water).
Evaporation Rate (N-Butyl acetate=1):	< 1
Oil/Water Distribution Coefficient:	N.D.
Density:	1.25 - 1.40
Vapor Density (air=1):	> 1
Freezing Point:	Approx. 0� C
PH:	7 - 8

Material Safety Data Sheet
100WB Beige / Grey Colored Epoxy Base Coat
Part A continued

Section 6 - FIRE & EXPLOSION HAZARD DATA

Flammability:	No
Extinguishing Media:	Foam, dry powder, water fog and carbon dioxide gas.
Flash Point:	N.A. (extinction of ignition source at 79� C - closed up).
Ignition Point:	N.D.
Flammability Limits (% volume):	Minimum: 1.7 - Maximum: 15.6 (2-ethoxyethanol).
Hazardous Combustion Products:	Carbon monoxide, carbon dioxide.
Explosion Data:	No
Special Methods:	In the case of major fire, wear self-contained respirator and full protective clothing. Cool nearby containers and structures with water fog.

Section 7 - REACTIVITY DATA

Chemical Stability:	Yes.
Incompatibility:	Oxidants, bases and acids.
Reactivity/Conditions to Avoid:	Non hazardous polymerization with its part B, see technical bulletin. Excessive heating & freezing.
Hazardous Decomposition Products:	Carbon monoxide, carbon dioxide when subjected to high temperatures.

Section 8 - PREVENTION

Protection Equipments:	Consult safety equipment specialist for more information concerning trade names and models.
Respiratory Protection:	Threshold limits have only few changes to be exceeded if product is roller applied at room temperature in a well ventilated area. However, wear cartridge respiratory mask for organic vapor when they are exceeded.
Eye Protection:	Splash proof goggles.
Body Protection:	Clothing covering entire arms and legs is recommended.
Hand Protection:	Impervious gloves ( latex, neoprene, ) which cover wrists.
Shoes:	Impervious (thick leather or rubber) are suggested.
Ventilation:	General.
Handling:	Handle with safe approved handling equipment. Avoid direct contact with product.
Storage/Transportation:	Keep in cool, dry and well-ventilated place. Keep containers upright, hermetically closed. Keep from freezing.
Spill/Leak Procedure:	Ensure adequate ventilation. Contain with inert material. Shovel into waste disposal approved container. Clean normally.
Waste Disposal:	According to Federal regulations.

Section 9 - MATERIAL SAFETY DATA SHEET PREPARATION

**LEGEND**
N.A.	Not Applicable
N.D.	Not Determined.

Prepared By:	Daniel Bernier
Telephone:	(450) 655-6421 (business hours)
	(450) 464-8291 (night & weekends)

The information contained herein is based on the data available to us and is believed to be correct. However, we make no warranty, or implied, regarding the accuracy of this data or the results to be obtained from the use thereof. We assume no responsibility for the injury from expressed use of the product described herein.

Material Safety Data Sheet
100WB Beige / Grey Colored Epoxy Base Coat

Part B